SmartMesh IP wireless sensor networks are self managing, low power internet protocol (IP) networks built from wireless nodes called motes.The LTP5902-IPM is printed circuit board assembly (PCBA) product with on-board chip antenna in the Eterna® family of IEEE 802.15.4e solutions, featuring a highly integrated, low power radio design as well as an ARM Cortex-M3 32-bit microprocessor running SmartMesh IP embedded networking software. The LTP5902-IPM, at 37mm × 24mm, is built for surface-mount assembly.
With SmartMesh IP time-synchronized networks, all motes in the network may route, source or terminate data, while providing many years of battery powered operation. SmartMesh IP is a highly flexible network with proven reliability and low power performance in an easy-to-integrate platform.
The LTP5902-IPM’s behavior in a SmartMesh IP network is determined by the choice of SmartMesh IP network software loaded: Wireless Mote, EManager, Access Point Mote in a SmartMesh IP network. The SmartMesh IP software provided with the LTP5902-IPM is fully tested and validated, and is readily configured via a software Application Programming Interface. Once you have purchased SmartMesh IP products, the SmartMesh IP stack binaries may be downloaded via your myAnalog account.
The pin signaling behavior of the LTP5902IPC-IPMA hardware is determined by the software loaded and is described in detail in the following product datasheets:
Network Features
|
Feature
|
Benefit
|
|
>99.999% Network Reliability
|
Avoids communications dropouts common with other wireless networks
|
|
NIST-certified AES-128 bit Encryption
|
Data protected by end-to-end encryption, message integrity checking and device authentication
|
|
Scalable
|
Uses time-slotted channel-hopping protocol to avoid in-network collisions to maximize scale while minimizing power and latency-hungry transmission retries due to congestion
|
|
Bidirectional Communications
|
Ideal for both monitoring and control applications
|
|
Up to 10 messages/second/node
|
Time-slotted communications avoids contention. This data rate includes built-in margin for packet retries.
|
Device Features
|
Feature
|
Benefit
|
|
Industry-Leading Low Power Radio Technology
|
• 4.5mA to Receive a Packet
• 5.4mA to Transmit at 0dBm
• 9.7mA to Transmit at 8dBm
|
|
Pre-engineered RF
|
RF elements include an on-chip power amplifier and are pre-tuned for optimized performance, including temperature compensation, saving development time.
|
|
RF Modular Certifications
|
Pre-certified in USA, Canada, EU, Australia/New Zealand, India, Japan, Korea, Taiwan
|
|
Energy Harvesting Support
|
Very low power design enables motes to be powered by a wide variety of energy harvesters.
|
|
Integrated Temperature Sensor
|
Precise temperature sensor is integrated directly into the mote.
|
Applications
SmartMesh IP is ideally suited for wireless Industrial Internet of Things (IoT) applications. To learn more about SmartMesh applications, click here.
