MAX98095
ObsoleteAudio Hub with FlexSound Processor
High Integration Enables a Single-Chip Audio Solution for Mobile Platforms
- Part Models
- 1
- 1ku List Price
- price unavailable
Part Details
- 102dB DR Stereo DAC (8kHz < fS < 96kHz)
- 90dB DR Stereo ADC (8kHz < fS < 96kHz)
- 4.2mW Headphone Playback Power Consumption
- Stereo, Low-EMI Class D Amplifiers
- 3.2W/Channel (4Ω, PVDD_ = 5.0V)
- 1.2W/Channel (8Ω, PVDD_ = 4.2V)
- Stereo DirectDrive® Headphone Amplifiers
- 33mW/Channel (32Ω)
- Differential Receiver Amplifier
- 2 Stereo Single-Ended/Mono Differential Line Inputs
- 3 Differential Microphone Inputs
- FlexSound Audio Processing
- Enhanced Speakerphone
- Single/Dual Microphone Noise Suppression
- Ambient Aware Receiver Output
- Acoustic Echo Cancellation
- Three I²S/PCM/TDM Digital Audio Interfaces
- Asynchronous Digital Mixing and Sample Rate Conversion
- Extensive Click-and-Pop Reduction Circuitry
- I²C/SPI Control Interface
- 108-Bump WLP package (6.4mm x 4.7mm, 0.5mm pitch)
The MAX98095 is a full-featured audio hub with Maxim's FlexSound® digital signal processor. This highly integrated device provides three I²S/PCM interfaces and powerful, high-performance amplifiers. The FlexSound DSP offers best-in-class noise suppression, echo cancellation, speaker protection, and ambient-aware algorithms to handle all the audio processing needs of portable devices. So you get the highest integration and audio quality possible.
Three differential analog microphone inputs and four 1-bit digital microphone inputs accept audio from main, accessory, and background microphones. Analog line inputs accept four single-ended or two differential audio signals. Three digital audio interfaces support I²S/PCM/TDM audio formats. Three integrated sample rate converters and highly configurable signal routing enable a wide range of use cases.
Integrated amplifiers can output signals from three DACs or any of the analog inputs. Amplifiers include a differential receiver amplifier, a stereo Class D speaker amplifier, a stereo Class H headphone amplifier and four single-ended line outputs.
The IC is fully specified over the -40°C to +85°C extended temperature.
Documentation
Data Sheet 1
Reliability Data 1
Technical Articles 1
Complete documentation is available upon completion of a Non-Disclosure Agreement (NDA). To request an NDA, click here.
Device Drivers 1
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.
| Part Model | Pin/Package Drawing | Documentation | CAD Symbols, Footprints, and 3D Models |
|---|---|---|---|
| MAX98095EWG+ | 108-WLCSP-N/A |
This is the most up-to-date revision of the Data Sheet.
Software Resources
Device Drivers 1
Evaluation Software 0
Latest Discussions
No discussions on MAX98095 yet. Have something to say?
Start a Discussion on EngineerZone®