LTM9003
LAST TIME BUY12-Bit Digital Pre-Distortion μModule Receiver Subsystem
- Part Models
- 3
- 1ku List Price
- Starting From $52.97
Part Details
- Fully Integrated Receiver Subsystem for Digital Pre-Distortion Applications
- Down-Converting Mixer with Wide RF Frequency Range: 400MHz to 3.8GHz
- 125MHz Wide Bandpass Filter, <0.5dB Passband Ripple
- Low Power ADC with Up to 12-Bit Resolution, 250Msps Sample Rate
- –145.5dBm/Hz Input Noise Floor, 25.6dBm IIP3
- 1.5W Total Power Consumption
- 50Ω Single-Ended RF and LO Ports
- Internal Bypass Capacitance, No External Components
- ADC Clock Duty Cycle Stabilizer
- 11.25mm × 15mm LGA package
The LTM9003 is a 12-bit digital pre-distortion μModule® receiver subsystem for the transmit path of cellular base-stations. Utilizing an integrated system in a package (SiP) technology, it includes a downconverting mixer, wideband filter and analog-to-digital converter (ADC). The system is tuned for an intermediate frequency (IF) of 184MHz and a signal bandwidth of up to 125MHz. The 12-bit ADC samples at rates up to 250Msps. Contact Analog Devices regarding customization.
The high signal level downconverting active mixer is optimized for high linearity, wide dynamic range IF sampling applications. It includes a differential LO buffer amplifier driving a double-balanced mixer. Broadband, integrated transformers on the RF and LO inputs provide single ended 50Ω interfaces. The RF and LO inputs are internally matched to 50Ω from 1.1GHz to 1.8GHz.
The CLK input controls converter operation and may be driven differentially or single-ended. An optional clock duty cycle stabilizer allows high performance at full speed for a wide range of clock duty cycles.
Applications
- Transmit Observation Path Receivers
- Digital Pre-Distortion (DPD) Receivers
- Wideband Receiver
- Wideband Instrumentation
Documentation
Data Sheet 1
Reliability Data 1
User Guide 2
Technical Articles 2
Product Selector Card 3
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.
| Part Model | Pin/Package Drawing | Documentation | CAD Symbols, Footprints, and 3D Models |
|---|---|---|---|
| LTM9003CV-AB#PBF | 108-Lead LGA (15mm x 11.25mm x 2.32mm) | ||
| LTM9003IV-AA#PBF | 108-Lead LGA (15mm x 11.25mm x 2.32mm) | ||
| LTM9003IV-AB#PBF | 108-Lead LGA (15mm x 11.25mm x 2.32mm) |
| Part Models | Product Lifecycle | PCN |
|---|---|---|
| No Match Found | ||
|
Jul 21, 2021 - 21_0159 Ink Mark to Laser Mark Conversion for µModule |
||
| LTM9003CV-AB#PBF | LAST TIME BUY | |
| LTM9003IV-AA#PBF | LAST TIME BUY | |
| LTM9003IV-AB#PBF | LAST TIME BUY | |
This is the most up-to-date revision of the Data Sheet.
Software Resources
Evaluation Software 1
LinearLab Tools
A collection of Matlab and Python programs that provide direct access to Linear Technology’s data converter evaluation boards.
Can't find the software or driver you need?
Hardware Ecosystem
Tools & Simulations
IBIS Model 1
Evaluation Kits
LTM9003-AA Demo Board with HSMC Connector, LVDS Outputs. Use DC1437 for PScope Evaluation
Resources
LTM9003-AB Demo Board | LVDS Output, Uses DC890 and LVDS_XFMR
Resources
LTM9003-AB Demo Board with HSMC Connector, LVDS Outputs. Use DC1437 for PScope Evaluation
Resources
LTM9003-AA Demo Board | LVDS Output, Uses DC890 and LVDS_XFMR
Resources
Latest Discussions
No discussions on LTM9003 yet. Have something to say?
Start a Discussion on EngineerZone®