LT3837

PRODUCTION

Isolated No-Opto Synchronous Flyback Controller

Data Sheet
Part Models
4
1ku List Price
Starting From $3.72
Viewing:

Part Details

  • Senses Output Voltage Directly from Primary Side Winding—No Optoisolator Required
  • Synchronous Driver for High Efficiency
  • Supply Voltage Range 4.5V to 20V
  • Accurate Regulation Without User Trims
  • Programmable Switching Frequency from 50kHz to 250kHz
  • Synchronizable
  • Load Compensation
  • Undervoltage Lockout
  • Available in a Thermally Enhanced 16-Lead TSSOP Package
LT3837
Isolated No-Opto Synchronous Flyback Controller
9V –18V to 3.3V at 10A Isolated Converter Efficiency vs Load Current Product Package 1 Regulation vs Load Current
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Reliability Data 1

User Guide 4

Design Note 2

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Hardware Ecosystem

Parts Product Life Cycle Description
Buck Regulators & Controllers 2
LTM8047
RECOMMENDED FOR NEW DESIGNS 3.1VIN to 32VIN Isolated μModule (Power Module) DC/DC Converter
LTM8048
RECOMMENDED FOR NEW DESIGNS 3.1VIN to 32VIN Isolated μModule (Power Module) DC/DC Converter with LDO Post Regulator
Oscillators 2
LTC6908
Resistor Set SOT-23 Oscillator with Spread Spectrum Modulation
LTC6909
PRODUCTION 1 to 8 Output, Multiphase Silicon Oscillator with Spread Spectrum Modulation
Protection Switches & Controllers 1
LTC4359
RECOMMENDED FOR NEW DESIGNS Ideal Diode Controller with Reverse Input Protection
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

LTspice 1

Models for the following parts are available in LTspice:

  • LT3837

LTpowerCAD

Design tools for the following parts are available in LTpowerCAD:

LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

Evaluation Kits

eval board
schematic 1
DC1038A-B

LT3837EFE | 9V to 36V input to 5V at 7A Synchronous Flyback Converter

Buy Now View Details

Product Details

Demonstration circuit 1038A-B is a 35W isolated flyback converter with synchronous rectification and primary-side regulation featuring the LT3837. This circuit was designed to demonstrate the high levels of performance, efficiency, and small solution size attainable using the part in a flyback power supply. It operates at 200kHz and produces a regulated 5V, 7A output from an input voltage range of 9V to 36V. Isolation voltage is 1500VDC.

eval board
schematic 2
DC1038A-C

LT3837EFE | 9V to 36V input to 12V at 3A Synchronous Flyback Converter

Buy Now View Details

Product Details

Demonstration circuit 1038A-C is a 36W isolated flyback converter with synchronous rectification and primary-side regulation featuring the LT3837. This circuit was designed to demonstrate the high levels of performance, efficiency, and small solution size attainable using the part in a flyback power supply. It operates at 200kHz and produces a regulated 12V, 3A output from an input voltage range of 9V to 36V. Isolation voltage is 1500VDC.

eval board
schematic 3
DC1038A-A

LT3837EFE | 9V to 36V input to 3.3V at 10A Synchronous Flyback Converter

Buy Now View Details

Product Details

Demonstration circuit 1038A-A is a 33W isolated flyback converter with synchronous rectification and primary-side regulation featuring the LT3837. This circuit was designed to demonstrate the high levels of performance, efficiency, and small solution size attainable using the part in a flyback power supply. It operates at 200kHz and produces a regulated 3.3V, 10A output from an input voltage range of 9V to 36V. Isolation voltage is 1500VDC.

eval board
schematic 4
DC950A-B

LT3837EFE Demo Board | 9V ≤ VIN ≤ 36V, VOUT: 5V/2A, 3.3V/3A, 2.5V/3A

Buy Now View Details

Product Details

Demonstration circuit 950A-B is an isolated, 30W multi-output, synchronous flyback converter in 1/8 brick format featuring the LT3837. Output voltage sensing is implemented without the use of opto-coupler, by sensing the voltage across a primary side auxiliary winding. A load compensation circuit is used to compensate for voltage drops caused by load currents. DC950A-B has input voltage range 9V-36V. Demonstration circuit 950A uses a transformer design with tapped secondary winding, to achieve higher efficiency and better cross regulation than is possible with a transformer that uses a separate winding for each output.
DC1038A-B
LT3837EFE | 9V to 36V input to 5V at 7A Synchronous Flyback Converter
DC1038A-B - Schematic
DC1038A-C
LT3837EFE | 9V to 36V input to 12V at 3A Synchronous Flyback Converter
DC1038A-C - Schematic
DC1038A-A
LT3837EFE | 9V to 36V input to 3.3V at 10A Synchronous Flyback Converter
DC1038A-A - Schematic
DC950A-B
LT3837EFE Demo Board | 9V ≤ VIN ≤ 36V, VOUT: 5V/2A, 3.3V/3A, 2.5V/3A
DC950A-A - Schematic

Latest Discussions

No discussions on LT3837 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed