MAX38914
推荐新设计使用4μVRMS Ultra-Low-Noise 1A LDO with Two-Level Output Voltage Selection
4µVRMS Ultra-Low-Noise 1A LDO
- 产品模型
- 2
产品详情
- Delivers Flexible Output Range
- 1.8V to 5.5V Input Voltage Range
- 0.6V to 5.0V Output Voltage Range
- 1A Maximum Output Current
- 28mV Dropout at 1A Load Current and 5.0V Supply
- 33mV Dropout at 1A Load Current and 3.6V Supply
- Excellent DC and AC Performance
- 1% Regulation over Line, Load, and Temperature
- 4µVRMS of Output Noise, 10Hz to 100kHz
- 75dB PSRR at 10kHz
- High-Level System Integration
- Integrated Pass-Through Function
- Fast Active Discharge of 6Ω at OUT
- Dynamic Two-Level Voltage Scaling with 33 Levels for Each Option for Flexible Configuration (MAX38913)
- 2V, 2.3V Pre-Programmed Voltage Levels (MAX38914)
- Stable with 4µF (Minimum Capacitance)
- Overcurrent and Overtemperature Protection
- Power-OK/Power-on-Reset Output
- Operation Temperature Range from -40°C to +125°C
- Package
- 12-Bump, 0.4mm-Pitch WLP
- 14-Pin, 3mm x 3mm TDFN
The MAX38913/MAX38914 is a low-noise linear regulator that delivers up to 1A of load current with as low as 4μVRMS of output noise. The MAX38913/MAX38914 can dynamically change its output voltage between two separate levels. The MAX38913/MAX38914 has the pass-through mode which, when enabled, completely bypasses the linear regulator.
This regulator maintains ±1% output accuracy over a wide input voltage range, temperature, and load conditions. The no-load quiescent current in the regulation mode is 1.37mA. During the pass-through mode, unlike the conventional dropout mode of an LDO, the MAX38913/MAX38914 consumes very little quiescent current. The MAX38913/MAX38914 has a 6Ω active discharge feature to quickly discharge output capacitors of up to 300μF.
The MAX38913 has 33 programmable output-voltage settings for both voltage selections. The MAX38914 has pre-programmed output voltage levels of 2.3V and 2V. The MAX38913/MAX38914 is packaged in either a space-saving 12-bump WLP or a full-featured 3mm x 3mm, 14-pin TDFN package. Optional power-OK and power-on-reset pins are available in the 14-pin TDFN version.
Applications
- Image Sensors
- Portable Sensor Applications
- SD Memory Cards
参考资料
ADI 始终高度重视提供符合最高质量和可靠性水平的产品。我们通过将质量和可靠性检查纳入产品和工艺设计的各个范围以及制造过程来实现这一目标。出货产品的“零缺陷”始终是我们的目标。查看我们的质量和可靠性计划和认证以了解更多信息。
产品型号 | 引脚/封装图-中文版 | 文档 | CAD 符号,脚注和 3D模型 |
---|---|---|---|
MAX38914AANC+ | 12-WLCSP-N/A | ||
MAX38914AANC+T | 12-WLCSP-N/A |
这是最新版本的数据手册
硬件生态系统
部分模型 | 产品周期 | 描述 |
---|---|---|
MAX38913 | 推荐新设计使用 | 提供两级输出电压选择的 4µVRMS超低噪声1A LDO |
评估套件
最新评论
需要发起讨论吗? 没有关于 MAX38914的相关讨论?是否需要发起讨论?
在EngineerZone®上发起讨论