Using the DS2480B Serial 1-Wire® Line Driver
Abstract
The DS2480B is a serial bridge to the 1-Wire network protocol. This bridge allows any host with a very modest serial communication UART to generate properly timed and slew controlled 1-Wire waveforms. Application Note 192 is a user guide for the DS2480B Serial 1-Wire Line Driver by providing detailed communication sessions for common 1-Wire master operations. Read full article.
Related to this Article
Products
Serial to 1-Wire Line Driver
High-Precision Li+ Battery Monitor with Alerts
Smart Battery Monitor
Silicon Serial Number
1-Wire Quad A/D Converter
1-Wire Time Chip With Interrupt
iButton RTC
1-Wire Parasite-Power Digital Thermometer
1-Wire Digital Temperature Sensor with 1Kb Lockable EEPROM
1-Wire Parasite-Power Digital Thermometer
Parasite-Power Digital Thermometer
1-Wire Ambient Temperature Sensor
1-Wire Parasite-Power, Ambient Temperature Sensor
Programmable Resolution 1-Wire Digital Thermometer
Temperature iButton
Thermochron iButton Device
1-Wire EEPROM
iButton 1Kb/4Kb Memory
4Kb 1-Wire EEPROM
48-Bit Node Address Chip
Dual Addressable Switch Plus 1Kb Memory
iButton 1Kb/4Kb Memory
iButton 1Kb Add-Only
1Kb Add-Only Memory
1Kb Protected 1-Wire EEPROM with SHA-1 Engine
Silicon Serial Number with or without VCC Input
iButton 16Kb Memory
iButton 256-Bit EEPROM
16Kb Add-Only Memory
1-Wire 8-Channel Addressable Switch
iButton Monetary Device with SHA-1 Function
iButton 4Kb EEPROM
iButton 64Kb Memory
64Kb Add-Only Memory
iButton Serial Number
1024-Bit 1-Wire EEPROM
iButton 16Kb Add-Only
{{modalTitle}}
{{modalDescription}}
{{dropdownTitle}}
- {{defaultSelectedText}} {{#each projectNames}}
- {{name}} {{/each}} {{#if newProjectText}}
-
{{newProjectText}}
{{/if}}
{{newProjectTitle}}
{{projectNameErrorText}}
Latest Media 20
