DS1413
Passive Serial Port iButton Holder
Part Details
- Small-size, low-cost RS232C COM Port interface for iButtons®
- Reads all and writes to non-EPROM iButtons at regular speed
- Powered entirely from RS232 interface
- Standard female COM port connector
The DS1413 performs RS232-level conversion and generates 1-Wire® communication signals. With a TMEX software driver, the adapter enables an IBM®-type PC to directly read and write any non-EPROM 1-Wire devices and read all EPROM-based iButtons. The serial port must be able to support a data rate of 115.2kbits/s for a maximum effective 1-Wire transfer rate of 14.4kbits/second (regular speed). Includes DS9098 retainer for single F5 MicroCan and can replace the DS9097 in applications that use only a single iButton®. Multiple iButtons can be connected to the DS1413 using a DS1402D-DB8 Blue Dot™ Receptor or similar cable together with a DS1401 iButton holder.
Documentation
Data Sheet 1
Reliability Data 1
Technical Articles 1
This is the most up-to-date revision of the Data Sheet.
Latest Discussions
No discussions on DS1413 yet. Have something to say?
Start a Discussion on EngineerZone®